These contract-quality horn speaker with a high SPL output, moisture resistant ABS plastic horn and internal 100 Volt line transformer with rotary switch for tappings. They are ideal for indoor or outdoor use and each is supplied with an adjustable metal mounting bracket. IP65 rated.
- Suitable for use indoors or outdoors
- Weatherproof design with IP65 rating
- Moisture resistant ABS plastic horn
- Internal switchable 100 Volt line transformer
- Supplied with sturdy adjustable mounting bracket
Eagle P111CG Mobile Public Address Amplifier – Technical Specifications & Setup Guide
System & Power Handling
-
System Type: Heavy-duty mobile public address (PA) mono amplifier with integrated siren and media playback
-
Amplifier Power: 60 W RMS / 90 W Peak
-
Output Modes: Low-impedance 4–16 Ω direct speaker output
-
Power Supply: 12 V DC (11–15 V DC operational range, vehicle/battery power)
-
Power Consumption: Max. 80 W (at full output)
Audio Performance & Transducers
-
Frequency Response: 70 – 16,000 Hz (±3 dB)
-
Signal-to-Noise Ratio (S/N Ratio): Mic > 68 dB, Aux > 78 dB
-
Total Harmonic Distortion (THD): < 0.8% @ rated output power (1 kHz)
-
Speaker Outputs: Heavy-duty barrier screw terminal strip for 4–16 Ω low-impedance connection
Connectivity & Input Options
-
Microphone Inputs: 2 x 6.3 mm (1/4") Jack inputs with individual level controls (Mic 1 front panel with priority ducking, Mic 2 rear panel)
-
Auxiliary Line Input: 1 x Stereo RCA pair / 3.5 mm mini-jack line input for external audio playback
-
Integrated Media Player: Built-in MP3 player supporting USB drives and SD card media
-
Alert Signal Generator: Multi-tone Siren / Horn / Whistle signal generator for emergency and crowd management signaling
Controls & Indicators
-
Control Elements: Master Volume control, Mic 1 & Mic 2 Gain knobs, Aux/Media Level control, Tone Control (Bass/Treble tilt), Siren trigger controls
-
Power Switch: Front-panel power toggle with integrated 12V DC reverse polarity protection
-
Display & Indicators: Backlit display for MP3 media tracking, Power LED indicator, Signal/Peak LED
Enclosure & Hardware
-
Cabinet Material: Rugged, heat-dissipating steel chassis (black finish)
-
Mounting Hardware: Under-dash / vehicle mounting bracket and hardware kit included
-
Heat Management: Convection cooling via passive side ventilation slots
-
Application Modes: High-power mobile public address, emergency response vehicles, security patrol units, commercial transport announcements, outdoor events, and marine vessel paging
Physical Specifications
-
Dimensions (W x D x H): 200 x 165 x 65 mm (7.9" x 6.5" x 2.6")
-
Weight: 1.55 kg (3.4 lbs)
Accessories Included
-
12 V DC Fused Power Cable (Bare-Wire & Cigarette Lighter Adapter)
-
Handheld Dynamic Paging Microphone with Push-to-Talk (PTT) Switch
-
Vehicle Under-Dash Mounting Bracket & Fixings
-
Operating Instructions Manual
